Ubiquiti Wave Pico

Mechanical
Dimensions    Ø152.1 x 55.8 mm (Ø6 x 2.2")
Weight    Without mount: 347 g (12.2 oz)
With mount: 409 g (14.4 oz)
Enclosure material    UV stabilized polycarbonate
Mount material    UV stabilized polycarbonate
Pole mount diameter    20 to 53.1 mm (0.8 to 2.1") on pipe outer diameter
Wind loading    31.3 N at 200 km/h (7 lbf at 125 mph)
Weatherproofing    IPX6
Hardware
Processor    Dual-core ARM® Cortex®-A53 at 1 GHz
Memory    DDR3L 512 MB
Networking interface    (1) GbE RJ45 port
Max. power consumption    10W
Power method    Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8 -)
Passive PoE 2-pairs (4, 5+; 7, 8 -), for 44–54V DC only
Power supply    48V DC, 0.5A gigabit PoE adapter (Included)
Can be powered by a UISP Router or UISP Switch
Supported voltage range    44–54V DC
22–27V DC
GPS    No
Button    Factory reset
LEDs    Power, Ethernet, link
Ambient operating temperature    -40 to 60° C (-40 to 140° F)
Ambient operating humidity    5 to 95% noncondensing
Certifications    FCC, IC, CE
Software
Operating mode    PtMP station, PtP
Ubiquiti specific features    Wave AI, discovery protocol
Services    UISP, ping watchdog, NTP client, SNMP
Tools    Antenna alignment, discovery utility, ping, trace route, speed test, cable test*, site survey*, traffic shaping**
*FW version 3.3.0 and later.
**FW version 3.4.0 and later.
Network    Bridge/Router* mode
*Router is available in PtMP station mode only.
Application requirements    UISP web: Version 2.4.61 and later
UISP mobile iOS™: Version 2.32.0 and later
UISP mobile Android™: Version 2.31.9 and later
System
Total throughput    2 Gbps (1 Gbps duplex)
Max. range    Up to 1.3 km (Wave AP)
Up to 0.9 km (Wave AP Micro)
Encryption    WPA2-PSK (AES)
RF
Operating frequency*    57–71 GHz
*Depends on regulatory region.
Channel bandwidth    2160, 1080, 540* MHz
*FW version 3.3.0 and later.
Operating channels*    58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz
*Depends on regulatory region.
Modulation    16QAM, QPSK
Antenna gain    27.7 dBi
Polarization    Vertically linear
Beamwidth    Azimuth: 3 dB 6°
Elevation: 3 dB 6°
Back-Up RF
WiFi standard    802.11ax (WiFi 6)
Operating frequency*
US/CA




Worldwide    
U-NII-1 5150 - 5250 MHz
U-NII-2A 5250 - 5350 MHz
U-NII-2C 5470 - 5725 MHz
U-NII-3 5725 - 5850 MHz

5180 - 5875 MHz
*Depends on regulatory region.
Channel bandwidth    20, 40, 80 MHz
Modulation    BPSK (1⁄2), QPSK (1⁄2), QPSK (3⁄4), 16QAM (1⁄2), 16QAM (3⁄4), 64QAM (2⁄3), 64QAM (3⁄4), 64QAM (5⁄6), 256QAM (3⁄4), 256QAM (5⁄6), 1024QAM (3⁄4), 1024QAM (5⁄6)
Antenna gain    9 dBi
Polarization    Dual-linear
Beamwidth    Azimuth: 3 dB 50°
Elevation: 3 dB 50°
Cross-pol isolation    15 dB
LEDs
Power    Flashing white: bootup in progress
White: not connected to UISP application
Blue: connected to UISP application
Flashing blue: locate in progress
Blue/white: firmware upgrade in progress
Ethernet    Flashing blue: Ethernet traffic detected
Links    White: 5 GHz link
Blue: 60 GHz link